11”
Fold
Fold
Fold
17”
Fold
Fold
Fold
Sky Rich Star Limited
UNIT E, 10/F, WORLDWIDE CENTRE,
123 TUNG CHAU STREET, TAI KOK TSUI,
KL, HONG KONG
Toll-free: 1-877-723-0723
Made in China
© 2019 Sky Rich Star Limited, all rights reserved.
The Honeywell Trademark is used under license
from Honeywell International Inc.
Honeywell International Inc. makes no
representations or warranties with respect
to this product. This product is manufactured for
Sky Rich Star Limited.
Model: NK0145A30610
LED Triple Head Linkable Security Light
With 270° Motion Detection
Use and Care Guide
Read and Save These Instructions Before Use
EN
EN | 4
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
**********************************************************************************************
FCC WARNING:
NOTES:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
RF EXPOSURE:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum distance of 20
cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
TROUBLE SHOOTING
PROBLEM
Light will not come on.
A. Light switch is turned off.
B. Fuse is blown or circuit breaker is
turned off.
C. Incorrect circuit wiring.
D. Motion sensor head is not aimed
correctly.
E. The light is in a brighter
environment.
A. Turn light switch on.
B. Replace fuse or turn circuit breaker
on.
C. Verify that fixture is wired properly.
D. Re-aim the motion sensor to cover
the desired area.
E. Install the lamp in a dark
environment.
A. Motion sensor may be installed
in a relatively dark location.
B. Motion sensor is in TEST mode.
A. Reposition motion sensor.
B. Switch the ON-TIME setting option
to another time location.
POSSIBLE CAUSE
SOLUTION
Lights come on during
the day.
A. Motion sensor may be sensing moving
objects such as trees, traffic, etc.
B. Sensitivity may be set too high.
A. Reposition motion sensor.
B. Reduce sensitivity.
Lights come on for no
apparent reason.
A. Heat or light from the lamp heads may
be turning the motion sensor on and off.
B. Heat being reflected from other objects
may be turning the motion sensor on and
off.
A. Reposition lamp heads away from
the motion sensor.
B. Reposition motion sensor.
Lights flash on and off.
