Honeywell MX3PLUS, Reference Manual

Page: 300 / 306

External Connectors / Interface / USB Host / Client Ports / Power Connector
IrDA Connector (COM 2) bidirectional half-duplex Supports 115k baud
Endcap – Dual Serial, DA-9 or DB-9 Connector (COM
1 and COM 3) 9 Pin “D” (male) Connector. Provides connection to external devices
such as a printer.
Endcap – incl Scanner (COM 3), DA-9 or DB-9
Connector (COM 1) 9 Pin “D” (male) Connector. Provides connection to external devices
such as a printer.
Endcap – incl Scanner (COM 3), DA-9 (COM 1)
Scanner – SE955 Short Range (SE923 replaced with SE955 July
2006).
Power Connector
External Battery Charger Contacts. 8.5V – 15 VDC Input Power.
Power Jack. 10.8 – 16VDC Input Power
Audio Connector Audio Jack on endcap.
Dimensions and Weight
Dimension
Length with Endcap 6” / 15 cm
Width with Endcap 8” / 20 cm
Height with Endcap 1.44” / 3.66 cm
Weight
Unit with radio, battery and scanner endcap Less than 30 oz / <850g
Battery 5.6 oz / 157g
Network Card
1.0 oz / 28g
1.6 oz / 45g
SRAM Card 1 oz / 28g
Environmental Specifications
Operating Temperature 32°F to 122°F (0°C to 50°C)
Storage Temperature -22°F to 158°F (-30°C to 70°C)
ESD 8 KV air, 4kV direct contact
Operating Humidity 5% to 90% non-condensing at 104°F (40°C)
Water and Dust IEC 60529 compliant to IP66
Vibration Based on MIL Std 810D
Ambient Light – ranging from total
darkness to direct sunlight Display readable (with backlight on) for <= two hours Keypad readable (after previous
exposure to a 60W bulb for 30 minutes) for <= 15 minutes.
8-2