Honeywell MX3PLUS, Reference Manual

Page: 20 / 306

Startup Help
Can’t change the date/time or
adjust the volume. AppLock is installed and may be running in User Mode on the MX3Plus. AppLock user
mode restricts access to the control panels.
Touch screen is not accepting
stylus taps or needs recal-
ibration.
Press <Ctrl>+<Esc> to force the Start Menu to appear. Use the tab, backtab and cursor
keys to move the cursor from element to element.
MX3Plus seems to lockup as
soon as it is warm booted.
There may be slight delays while the wireless client connects to the network, authorization
for voice-enabled applications complete, Wavelink Avalanche management startup com-
pletes, and Bluetooth relationships establish or re-establish. When the desktop appears or
an application begins, the MX3Plus is ready for use.
New MX3Plus main batteries
don't last more than a few hours.
New batteries must be fully charged prior to first use. Li-Ion batteries (like all batteries) grad-
ually lose their capacity over time (in a linear fashion) and never just stop working. This is
important to remember – the MX3Plus is always ‘on’ even when in the Suspend state and
draws a small amount of battery power at all times.
Keep losing ActiveSync con-
nection between my host com-
puter and the MX3Plus. When the MX3Plus enters Suspend Mode, all connections are closed to save battery
power. When the MX3Plus wakes up, if ActiveSync connection does not automatically re-
establish, disconnect the cable, wait 1-2 seconds and reconnect the cable.
1-6