www.honeywell.com/security
78 |
MPA1 User Guide
Alarms
Alarms are system-generated messages that might indicate the need for user attention.
To view alarms and events, you have to navigate to the Alarms & Events window.
Events
Events are both panel- and web-generated events. Panel events include the recording of a
card read by a reader. Web events include the recording of a user login.
Navigating to the Alarms & Events tab:
Click
to open the menu, then click
Alarms & Events
. NOTE: Alarms & Events display
transactions from all panels in the loop on the same page. The users do not have to go to
each panel to see their individual transa
Figure 3-1 Alarms & Events Window
Table 3-1
Alarms & Events Fields
Field
Description
Event/Alarm indicator:
Grey
= Event
Gold
= Alarm
Date/Time
Indicates the date and time of the event.
Time sort
: You can sort the events by most recent or most
distant by clicking the up arrow next
to
Date/Time
in
the header
Date filter
: You can filter by date (the last seven days, the
last 30 days, or custom) by clicking the filter icon
next
to
Date/Time
in the header
Panel Number
Indicates the Panel ID if you have more than one panel in a
loop.
Device Name
Displays the name of the device that generated the alarm.
Summary of Contents for MPA1
Page 1: ...Document 800 26311_Rev B July 2020 Access Control Unit MPA1 User Guide ...
Page 14: ... 13 Document 800 26311_ A April 2020 This page is intentionally left blank ...
Page 72: ... 75 Document 800 26311_ A April 2020 This page is intentionally left blank ...
Page 100: ...www honeywell com security 104 MPA1 User Guide This page is intentionally left blank ...
