manualshive.com logo in svg

Honeywell Minitrend QX, User Manual

The Honeywell Minitrend QX user manual is available for free download from manualshive.com. This comprehensive manual provides step-by-step instructions and detailed information on operating and optimizing the Minitrend QX system. Enhance your product experience by accessing the manual for free.

Share
Download
background image

43-TV-25-30  Iss.6   GLO  Aug 07  UK

259

Specification Tables

Specification                                            Design Attributes

Digital indicators and Display

QX Recorder
Display size and Type: 

5.5” diagonal, Digital Colour LCD (TFT) with Touch Screen

Industrial grade with brightness adjustment and wide viewing angle

Resolution: 

QVGA (320 x 240 pixels). 

Screen Saver: 

Set in minutes from 1 to 720, can be set to dim the screen or to switch off.

Brightness adjustment: 

Adjustable between 10 and 100%, default set to 80% brightness. 

Backlight life time:

 55,000 hours to half brightness when used at 100%, (86,000hr if used at 80%). 

Maximum luminosity 400 cd/m

2

.

Touch Screen life:

 1,000,000 touches

SX Recorder
Display size and Type: 

12.1” diagonal, Digital Colour LCD (TFT) with Touch Screen

Industrial grade with brightness adjustment and wide viewing angle

Resolution: 

SVGA (800 x 600 pixels). 

Screen Saver: 

Set in minutes from 1 to 720, can be set to dim the screen or to switch off.

Brightness adjustment: 

Adjustable between 10 and 100%, default set to 80% brightness. 

Backlight life time:

 43,000 hours to half brightness when used at 100%, (67,000hr if used at 80%).

Maximum luminosity 400 cd/m

2

.

Touch Screen life:

 1,000,000 touches

QXe Recorder
Display size and Type: 

5” diagonal, Digital Colour LCD (TFT) with Touch Screen 

Industrial grade with brightness adjustment and wide viewing angle

Resolution: 

QVGA (320 x 240 pixels). 

Screen Saver: 

Set in minutes from 1 to 720, can be set to dim the screen or to switch off.

Brightness adjustment: 

Adjustable between 10 and 100%, default set to 80% brightness. 

Backlight life time:

 40,000 hours to half brightness when used at 100%, (62,500hr if used at 80%). 

Maximum luminosity 450 cd/m

2

.

Touch Screen life:

 1,000,000 touches

Display Update Rate

Display values updated every second

Status Display

A status bar, at the top of the recorder’s screen, displays the real-time icons of the recorder status, 
such as Time left and alarm active.

Communications

Ethernet 10/100 base - T with RJ45 connector supporting Modbus/TCP, FTP, Internet, DHCP or 
fixed IP address. RS485Modbus RTU (up to 115200 Baud Rate). RS485 is available as an option 
on the Comms card for the 

QXe

.

Mathematics

Basic maths include Add, Subtract, Multiply, Divide, Modulo and power. Full Maths and Scripting 
(option) support up to 100 character free form math expression for each pen. Like SINE, COS, 
TAN, Log, Parenthesis (eg. A1 + A2), comm variables, free memory, and access to any data item 
variable (A1, P1, D1 etc.). (Scripting is not available for the 

QXe

). 

Front and Rear USB Ports

USB host ports front and rear for data and setup transfers through these ports. External devices 
keyboard or mouse, Barcode reader, or external mass storage device. (Rear USB Host is available 
as an option on the Comms card for the 

QXe

)

Standard Screens and Custom 
Screens

Fully programmable display values in engineering units. Time & date stamp on every division, pro-
viding the current time and date.
Sets of Standard screens are available to display data on a chart, digital reading, bargraphs or 
numerous combinations thereof. Screen properties can be modified on the recorder and custom-
ised to suit. Custom screens created in the Screen Designer software can be imported into the 
recorder for specialist applications. Custom Screen firmware option is required.
Digital values displayed include alarms on bars, engineering units, pen name, tag, time and date, 
20 character description and totalised values. (Custom Screens are not available as an option for 
the 

QXe

)

Summary of Contents for Minitrend QX





































































































































































































































































































































Reviews:

No comments

Related manuals for Minitrend QX

Yenista Optics TUNICS T100S-HP User Manual preview
TUNICS T100S-HP
Brand: Yenista Optics Pages: 66
Callaway 350TL Manual preview
350TL
Brand: Callaway Pages: 13
Eaton Eclipse Series Installation And Operation Manual preview
Eclipse Series
Brand: Eaton Pages: 53
Oceanic GEO Operating Manual preview
GEO
Brand: Oceanic Pages: 75
QUBINO Smart meter Manual preview
Smart meter
Brand: QUBINO Pages: 2
Zeversolar ComBox Installation And Operating Instructions Manual preview
ComBox
Brand: Zeversolar Pages: 35
Zenner zelsius C5-ISF Installation And Operating Instructions Manual preview
zelsius C5-ISF
Brand: Zenner Pages: 52
Hanna Instruments HI 701 Quick Start Manual preview
HI 701
Brand: Hanna Instruments Pages: 2
Kawai MP9500 Owner'S Manual preview
MP9500
Brand: Kawai Pages: 64
Kawai MR170 Owner'S Manual preview
MR170
Brand: Kawai Pages: 28
Kawai MR370 Owner'S Manual preview
MR370
Brand: Kawai Pages: 28
LEM EM4TII+ Manual preview
EM4TII+
Brand: LEM Pages: 33
Nidec-Shimpo FGE-0.5XY Operation Manual preview
FGE-0.5XY
Brand: Nidec-Shimpo Pages: 6
Interacoustics AT235 Instructions For Use Manual preview
AT235
Brand: Interacoustics Pages: 60
Monnit Alta Site Survey Tool User Manual preview
Alta Site Survey Tool
Brand: Monnit Pages: 15
Dive Gear Express DGX Gears XTRA Regulator Service Manual preview
DGX Gears XTRA Regulator
Brand: Dive Gear Express Pages: 26
AccuEnergy AcuMesh User Manual preview
AcuMesh
Brand: AccuEnergy Pages: 23
K&K Sound Powermix Pure Product Manual preview
Powermix Pure
Brand: K&K Sound Pages: 2

Brands by name

Popular brands

Load more brands