Honeywell Minitrend QX User Manual Download Page 170

Page: 170 / 324

164

43-TV-25-30 Iss.6 GLO Aug 07 UK

Pulse Inputs Status

(Main Menu > Status > Diagnostics > Hardware > Pulse Inputs)

Not available for the

eZtrend QXe

•

Channel

- Displays the Slot position, eg. A, B, C, D, E or F, the Pulse Input number and

the system channel position. This will show a tick if this channel is enabled.-

•

Frequency/Count

- Displays the input mode, fixed as Frequency (in Hertz)

•

Input

- Displays the current Pulse Input reading for this channel (in Hertz)

Back

to return to the previous screen or select

Print

to print the screen.

Events Status

(Main Menu > Status > Diagnostics > Events)

This status screen displays all the currently enabled Events as they occur.

Each event displays the event number <Event 1> followed by the event information:

C1: = Cause 1

C2: = Cause 2

C3: = Cause 3

C4: = Cause 4

E1: = Effect 1

E2: = Effect 2

E3: = Effect 3

E4: = Effect 4

If an Event has not been enabled no event will be listed in the status screen

If part of an event is not enabled one * will appear next to the incomplete cause or effect.

If a Cause is enabled but not an Effect or an Effect is enabled but not a Cause two ** will
appear next to the incomplete part of the event.

When a scheduled event is displayed it will show the next time a scheduled cause is due.

Summary of Contents for Minitrend QX





































































































































































































































































































































Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands

Honeywell Minitrend QX, User Manual

Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands