Honeywell Minitrend QX, User Manual

Page: 100 / 324

94 43-TV-25-30 Iss.6 GLO Aug 07 UK
If Pen 1 name is Furnace1, Tag is “Temperature”, the current value is 14.81, and the Unit
text is “Deg C”.
Embedded process variables can be used for Pen reports. See “Pen Report Syntax” on
page 121
Embedded variable are not case sensitive and spaces are allowed.
Event Effects (continued)
• Logging - Is an event effect that can Start or Stop logging, enter which one in Sub
Type. From Selection Type choose either Multiple pens, Pen group or All Pens and
select the relevant pen(s) below.
• Totaliser - Is an event effect that can Start, Stop, Reset or Reset and Start a Totaliser in
Sub Type. From Selection Type choose either Multiple pens, Pen group or All Pens and
select the relevant pen(s) below.
• Digital Outputs - Is an event effect that can switch a Digital Output On or Off. Enter
which one in Sub Type and select the relevant relay output(s)
• Alarm Acknowledge - this is an effect of an event that can acknowledge a latched
alarm on a Single Pen, Pen Group or All pens. Select the pen and the number of alarm
to be acknowledged.
• Email – Is an event effect that will send an Email when triggered by a Cause. Eg.
Cause = Totaliser Starts, Effect = Email is sent.
• • Sub Type - Auto, Single Line User or Multiline User. Auto will enter what the
Event was eg. Scheduled or Alarm triggered. Single Line User can have up to
69 characters of text or use
“Embedded Process Values” on page 91.
Multiline User can have up to 80 characters per line with up to 1000 characters
including spaces, carriage returns and line feed in total. They can also include
embedded process variable.
“Maths variables as embedded vari-
ables” on page 93 can be used in an email.
• • Recipients - Enter email recipients from the list. If no email recipients are
present. For setting up email recipients see
“Email” on page 80.