Honeywell FutureSmart Products
Satellite Installation Guide
Pg 4
Honeywell FutureSmart Products
IMPORTANT!!
CAUTION:
To prevent electric shock, do not use this plug with an extension cord, receptacle or other outlet unless the blades can be
fully inserted to prevent blade exposure.
NOTE TO INSTALLER:
This reminder calls the system installer’s attention to Article 820-22 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
165 Eileen Way, Syosset, NY 11791
Copyright © 2004 Honeywell International Inc.
www.honeywell.com/security
View from back side of Modules
Front view with modules installed
Installing an eight receiver DirectTV
SATV Distribution System in a QNIC
RG6
Co
ax
C
able
fr
om
/t
o re
ce
iv
ers
Triple LNB
SATV dish
A
nt
ennae
Plug transformer into
MDDS8202 and then into 110V
outlet
M
ini
Digit
al
C
oax
Ju
mp
er
s
The MDC8202 is used to feed between five
and eight receivers. If one to four DirectTV
receivers are used then you can use an MDP-3
and/or the pass through connections on an
MDC4XX module.to feed up to four. For
DishNetworks you will need to use
DishNetworks Proprietary Hardware to expand
beyond four.
