MBeacon
User’s Guide
23
8.2
Wireless
Wireless consists of editable parameters and actions to configure, form,
and test a closed-loop wireless network.
Under Programming Menu, select “Wireless.”
Press [Y/+] to scroll up or [N/-] to scroll down through wireless sub-
menus.
Note:
When you reach the last item and continue scrolling, a second
screen appears:
The scrolling “wraps,” so once you reach the first or last item of either
screen, it starts scrolling through the items in the other screen again.
Five choices (including Exit) are available:
PANID Setup
Channel Setup
Transmit Power Setup
Interval Setup
Exit
To make a selection, scroll until the circle to the left of your choice is
black, and then press [MODE].
Note:
If you do not make a selection in 60 seconds, it automatically exits
to the main Programming Menu.
