A P P E N D I X B
Event and Alarm Types
342
MAXPRO NVR 5.0 Installation and Configuration Guide
B
Figure B-13 Loiter Trace - Zones
8.
Under
Configure
>
Parameters
tab:
a.
Set the global parameters as shown below.
Figure B-14 Loiter Trace - Parameters
b.
Click
Save
once done.
9.
Once the configuration is done, click the Live tab. The Live View tab is displayed.
10.
Click
Start Loiter Logging
button at the bottom of page to start loitering process. Based
on the global parameters set the loiter alarms are generated and displayed on the left
pane as shown below. These alarms are also generated in MAXPRO NVR > Alarms
window.
Similarly you can configure the Intrusion Trace Alarms.
Summary of Contents for MAXPRO NVR Hybrid PE
