. . . . .
M A X P R O N V R W E B C L I E N T
MAXPRO NVR 5.0 Installation and Configuration Guide
219
and registers the same with IIS to use the same. It also allows you to configure the
Silverlight control to access a service in another domain.
To set the Web Configurator
1.
Double-click
on the desktop. The
MAXPRO Web Configurator
dialog box
appears. By default the
System Configuration
tab is selected.
Figure 9-1 MAXPRO WebConfigurator
2.
Under
User Configuration
: When the (non-window) Administrator log on name and
password is changed then you can update the credentials of MAXPRO NVR Web Client to
log on.
•
Type the
Username
and
Password
and then click
Update
.
Note:
You can update only the
NVRAdministrator
credentials used by the Web Server.
If you are changing the default administrator user credentials (admin/trinity) in
NVR through the desktop client, then you should change and update the
credentials in MaxproWEBConfigurator as well for Web Server to communicate
with NVR and Web Clients.
The Administrator credentials used by the Web Server should be configured as a
non-Windows Administrator user in the MAXPRO NVR through the desktop client.
As a good security practice, it is recommended to update the default credentials
on your system.
Summary of Contents for MAXPRO NVR Hybrid PE
