C O N F I G U R I N G M A X P R O N V R
Privacy Protection Settings (GDPR Favored)
190
MAXPRO NVR 5.0 Installation and Configuration Guide
6
Figure 6-50 Privacy protection Settings
At Camera Level
At camera level user can enable or disable the Anonymization based on the requirement.
1.
In
Configurator > Camera
tab, navigate to the camera properties for the specific
camera.
2.
Under
Primary Stream
>
Preference
tab, select the
Anonymization Enabled
check box
as shown below. By default it is not selected.
Figure 6-51 Anonymization Camera Level
At User level
An Administrator can enable Anonymization for a specific user in Users tab. The
corresponding user will be able to view only anonymized video.
1.
Navigate to
Configurator > User
tab.
2.
For the required User, select the
Anonymization
check box as shown below. By default it
is Enabled for all the operators.
Summary of Contents for MAXPRO NVR Hybrid PE
