Limitless™
WDRR Receiver
Issue 1,
50063987
Honeywell Sensing and Control
9
3
ANTENNA OPTIONS ALLOWED PER COUNTRY USE CODE
This section defines the antenna options that can be used in a particular country of interest; reference Section
2.1 for a list of Countries per Country Use Code. It is important to determine the country the WDRR will be used
in. Thereby, noting the correct Country Use Code in the WDRR nomenclature will help ensure proper selection
of antenna and/or cable options. The integral antenna mounts directly to the WDRR RP-SMA jack while the
remote antenna mounts to the WDRR RP-SMA jack via a cable assembly (see Section 8.3.3.1). Further
technical information on the WAN Series antennas, WAMM Series magnetic mounts and WCA Series cable
assemblies can be found in Sections 8.13.
WARNING
*
The WDRR must be installed in accordance with the requirements specified in this document in order
to comply with the specific Country Communication Agency requirements. (i.e. FCC, IC, ETSI, ACMA,
etc.) See Section 3 as it requires choosing the correct Country Use Code and thus allowable antenna
and/or cable usage.
3.1
COUNTRY USE CODE “A” ANTENNA OPTIONS
Table 11 – Country Use Code A Antenna Options
COUNTRY CODE A
Antenna
Type Code
(allowed for
use)
Integral Mount
Antennas
(allowed for use)
Remote
Mount
Antennas
(allowed for
use)
Magnetic Remote
Mount Assemblies/
Antennas
WAMM100RSP-005
WAMM100RSP-010
(allowed for use)
Extension Cable
Assemblies/Antennas
for Remote Mount
WCA200RSJRSP-002
WCA200RSJRSP-005
WCA200RSJRSP-010
WCA200RSJRSP-015
WCA200RSJRSP-020
(allowed for use)
Extension Cable
Assemblies/Antennas
for Remote Mount
WCA200RNPRSP-002
WCA200RNPRSP-010
(allowed for use)
00
WAN01RSP
WAN03RSP
WAN01RSP
WAN01RSP
WAN06RNJ
01
WAN02RSP
WAN06RNJ
WAN02RSP
WAN02RSP
02
WAN04RSP
WAN09RSP
WAN04RSP
WAN03RSP
03
WAN05RSP
WAN10RSP
WAN05RSP
WAN04RSP
04
WAN07RSP
WAN11RSP
WAN07RSP
WAN05RSP
05
WAN08RSP
WAN08RSP
WAN07RSP
06
WAN08RSP
07
WAN09RSP
08
WAN10RSP
09
WAN11RSP
10
11
Integral mount:
Antennas have an RP-SMA plug that connects directly to the WDRR RP-SMA jack
Remote mount:
Remote mount antenna uses a cable with a RP-SMA plug that connects directly to the WDRR RP-SMA jack
