Honeywell Krom Schroeder VAN Series Operating Instructions Manual Download Page 1

Contents

  · Edition 05.22 · EN · 03250824

DE, EN, FR, NL, IT

, ES, DA, SV

, NO, PT

, EL, TR, CS, PL, RU, HU – www

.docuthek.com

Magnetic relief valve VAn

1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 Checking the usage . . . . . . . . . . . . . . . . . . . . . 2
3 Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

4 Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Tightness test. . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Replacing the actuator . . . . . . . . . . . . . . . . . . . 4

7 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

8 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
9 Technical data  . . . . . . . . . . . . . . . . . . . . . . . . . 6

10 Designed lifetime  . . . . . . . . . . . . . . . . . . . . . . 7
11 Certification  . . . . . . . . . . . . . . . . . . . . . . . . . . 7
12 Logistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
13 Disposal  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1 sAFetY

1.1 Please read and keep in a safe place

 Please read through these instructions care-

fully before installing or operating. Following the installa-
tion, pass the instructions on to the operator. This unit 
must be installed and commissioned in accordance 
with the regulations and standards in force. These 
instructions can also be found at www.docuthek.com. 

1.2 explanation of symbols

 = Action 

 

= Instruction

1.3 Liability

We will not be held liable for damage resulting from 
non-observance of the instructions and non-com-
pliant use.

1.4 safety instructions

Information that is relevant for safety is indicated in the 
instructions as follows:

 DAnGeR

Indicates potentially fatal situations.

 WARnInG

Indicates possible danger to life and limb.

 CAUtIon

Indicates possible material damage.

All interventions may only be carried out by qualified 

gas technicians. Electrical interventions may only be 
carried out by qualified electricians.

1.5 Conversion, spare parts

All technical changes are prohibited. Only use OEM 

spare parts.

oPeRAtInG InstRUCtIons

Summary of Contents for Krom Schroeder VAN Series









Reviews: