Honeywell INTEVIO User Manual Download Page 96

Page: 96 / 133

Browse MCU Log

Users can browse the log of the MCU including the operation recording and fault log. Click the menu

Tools

—

〉

Browse MCU Log and the window below will be displayed.

Select an MCU from the drop-down list and set the start and end date, then click the

“Query” button.

The software will read the log data from the device automatically and display logs in the table below.
Click the

“Export” button to export and save the log data.

Upgrade RK-MCU Firmware

Users can click the menu Tools

—

〉

Upgrade MCU Firmware to query and upgrade the MCU

firmware version.

Enter the IP address of the MCU and click the

Firmware Query

button, the software will read and

display all the firmware versions, including the device type, file system version, kernel version, MCU
version, MAC address and system ID, etc.

If users need to upgrade the device firmware, click the button

Select

and select the program file in

*.bin format, then click the

Upgrade

button. The progress bar will show the upgrade status.

Summary of Contents for INTEVIO






































































































































Search results

Summary of Contents for INTEVIO

Reviews:

Related manuals for INTEVIO

Brands by name

Popular brands

Honeywell INTEVIO, User Manual

Search results

Summary of Contents for INTEVIO

Reviews:

Related manuals for INTEVIO

Brands by name

Popular brands