manualshive.com logo in svg

Honeywell IntelliDoX, User Manual, Page: 41 / 120

Share
Download
Honeywell IntelliDoX User Manual Download Page 41

INTELLIDOX DOCKING MODULE                                   USER MANUAL || DOCK STATION SETTINGS 

MENU 

HONEYWELL 

PAGE 40 OF 119 

Adjust Date and Time Settings 

Follow these instructions when you want to adjust the module time and date settings 

manually via the 

Adjust dock station settings

 menu. When you adjust and save the 

settings for one module in a group, the settings for all of the modules in the group are also 

changed. 

Adjusting Time and Date via the Module Settings Menu 

 

1.  Press and hold 

 on the keypad until 

Adjust dock station settings

 is displayed on 

the LCD. 

2.  Press   or   to select 

Adjust time and date 

and then press 

. If the procedure is 

passcode-protected, then enter the passcode and press   to continue. 

3.  The 

Adjust time and date

 menu is displayed and date settings are ready to edit. Edit 

the date settings, or press   to skip to the time settings. 

a)  To set the date, press   or   to select day, month or year, and then press 

 or   to change the value.  

b)  To change the date format, press   or   until the date labels are selected, 

and then press   or   to change the date display to year-month-day, day-

month-year, or month-day-year. 

4.  Press   to save the date settings and continue, or press   to cancel the date 

changes and go to time settings. The time settings screen is displayed. 

5.  Edit the time settings, or press   to skip the date settings and return to the 

Adjust 

dock station settings

 menu. 

a)  To set the time, press   or   to select a hours or minutes, and then press 

 or   to change the value. 

b)  To change the time format, press   or   until the time format is selected, 

and then press   or   to change the clock format to 12-hour or 24-hour. 

6.  Press 

 to save the changes and return to the 

Adjust dock station settings

 menu, 

or press   to cancel the time settings and return to the 

Adjust dock station 

settings

 menu. 

 

Summary of Contents for IntelliDoX

























































































































Reviews:

No comments