Honeywell HX3, User Manual, Page: 90 / 230

5 - 50
System
Start > Settings > Control Panel > System
Use these HX3 panels to:
• Review System and mobile device data and revision levels.
• Adjust Storage and Program memory settings.
• Assign a device name and device descriptor.
General Tab
System: This screen is presented for information only. The System parameters cannot be changed by the user.
Computer: The processor type is listed. The type cannot be changed by the user. Total computer memory and the
identification of the registered user is listed and cannot be changed by the user. Memory sizes given do not include
memory used up by the operating system. For example, a system with 128 MB may only report 99 MB memory, since
29 MB is used by the operating system. This is actual DRAM memory, and does not include internal flash used for
storage.
Memory Tab
Setting Default
General No user interaction
Memory 1/3 storage, 2/3 program memory
Device Name and Description Unique to equipment type
Copyrights No user interaction