Honeywell HX3, User Manual, Page: 159 / 230

9 - 7
Profile Parameters
Parameter Default Description
Edit Profile Default A string of 1 to 32 alphanumeric characters, establishes the name of the
Profile.
Options are Default or ThirdPartyConfig.
SSID Blank A string of up to 32 alphanumeric characters. Establishes the Service Set
Identifier (SSID) of the WLAN to which the client connects.
Client Name Blank A string of up to 16 characters. The client name is assigned to the network
card and the device using the network card. The client name may be passed
to networking wireless devices, e.g., Access Points.
Power Save Fast Power save mode.
Options are: Constantly Awake Mode (CAM) power save off, Maximum (power
saving mode) and Fast (power saving mode). When using power
management, use FAST for best throughput results.
Tx Power Maximum Maximum setting regulates Tx power according to the Max power setting for
the current regulatory domain.
Options are: Maximum, 50mW, 30mW, 20mW, 10mW, 5mW, or 1mW.
Bit Rate Auto Setting the rate to Auto will allow the Access Point to automatically negotiate
the bit rate with the client device.
Options are: Auto, 1 Mbit, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or 54 Mbit.
Auth Type Open 802.11 authentication type used when associating with the Access Point.
Options are: Open, LEAP, or Shared key.
EAP Type None Extensible Authentication Protocol (EAP) type used for 802.1x authentication
to the Access Point.
Options are: None, LEAP, EAP-FAST, PEAP-MSCHAP, PEAP-GTC, PEAP-
TLS, EAP-TTLS, or EAP-TLS.
EAP Type chosen determines whether the Credentials button is active and
also determines the available entries in the Credentials pop-up window.
Encryption None Type of encryption to be used to protect transmitted data. Available options
may vary by SCU version.
Options are: None, WEP (or Manual WEP), WEP EAP (or Auto WEP), WPA
PSK, WPA TKIP, WPA CCKM, WPA2 PSK, WPA2 AES, or WPA2 CCKM.
CKIP is not supported in the HX3.
The Encryption type chosen determines if the WEP Keys / PSK Keys button is
active and also determines the available entries in the WEP or PSK pop-up
window.