SETUP
• Remove the water tank by grasping the handle and
pulling straight up. Set aside (Fig. 1).
• Turn the Water Tank upside down so that the Fill Cap
is facing up; unscrew the Fill Cap by turning it
counter-clockwise and set aside.
• Fill the Water Tank with COOL tap water (Fig. 2). Distilled
water is not necessary as the water is purified by the
heating element.
DO NOT USE HOT WATER.
Doing so
may damage the humidifier.
• Replace the fill cap by turning it clockwise .
DO NOT OVER TIGHTEN.
NOTE: WHEN CARRYING THE FILLED WATER TANK,
PLEASE USE THE HANDLE AND PLACE YOUR OTHER
HAND UNDER THE TANK FOR ADDITIONAL SUPPORT.
• Turn the Water Tank right side up. Position the tank into
the humidifier and push it into place (Fig. 3).
• Some water will flow into the Removable Tray when the
filled tank is properly in place.
• Once the filled tank has been positioned, do not attempt
to move the humidifier. If it has to be moved, unplug the
humidifier and remove the water tank first.
CAUTION: DO NOT POUR WATER INTO THE
GRILLE ON TOP OF THE HUMIDIFIER (Fig. 3).
DOING SO MAY DAMAGE THE HUMIDIFIER OR
CAUSE PERSONAL INJURY.
NOTE: We recommend that the humidifier be disinfected prior to first use. Please
see WEEKLY CLEANING instructions.
• Select a firm, level, flat location - at least six inches (15 cm) from any wall for
proper air flow (Fig. 1). Place the humidifier on a water-resistant surface, as
water can damage furniture and some flooring.
Honeywell will not accept responsibility for property damage caused by water
spillage.
Fig. 1
➡
Fig. 2
Fig. 3
W
ALL
6"
FILLING
HU4078.01 HWM-910/910C OM 8/6/01 3:33 PM Page 4
