Honeywell HTRD400, Reference Manual, Page: 56 / 176

Rev 1.02 42 Document 900.0328
05/05
System Configuration
.
Appendix A provides a graphical representation of this quick reference list.
The subsections that follow describe the system settings on the various screens in detail.
Table 5-3 First Time System Configuration Tasks Quick Reference
No. Task See section …
1. Set the HTRD400 Recorder clock. Setting the Recorder Clock , page
43
2. Set global settings on HTRD400 Recorder. Configuring Recorder Global
Settings
, page 46
3. Configure the system: System Configuration , page 44
a. Configure connected trigger inputs. Configuring or Modifying Trigger
Inputs
, page 47
b. Configure connected camera(s). Configuring the Camera(s) , page
50
c. Test camera coverage. Confirming the Camera Coverage
on page 54
d. Enable GPS, if supported. Configuring GPS , page 55
e. Set up record rules. Setting Record Rules , page 55
f. Review the configuration summary. Reviewing a Configuration File ,
page 65
g. Save the configuration file (recommended). Saving a Configuration to a File on
a PC
, page 67
h. Upload the configuration file to the
HTRD400 Recorder. Uploading a Configuration File to
an HTRD400 Recorder
, page 67
4. Set up user accounts, if desired. Controlling User Access , page 68