Honeywell HTRD400, Reference Manual, Page: 12 / 176

Rev 1.02 900.0328
05/05
x
• Appendix B, Factory Set Configurations , describes the four configuration scenarios
that come with your HTRD400 Recorder.
• Appendix C, Networking , explains in detail closed-loop networking as it applies to
the HTRD400 network.
• Appendix D, Solutions , provides answers for common technical issues as well as
explaining common static and error message generated by the Toolbox and Player
applications. This appendix also describes the images that display on the Player
screen when the recorder experiences video loss from a camera or when you select
a clip to view.
• Appendix E, Specifications and Connector Pinouts , lists the technical specifications
for the HTRD400 Recorder. It also shows schematics for the interface connector and
CAT5 data/power and CAT5 Ethernet crossover cables. The 25-pin interface
connector pinouts are included.
• The Glossary is a quick reference for acronyms and terms used throughout the
document.
Related Documents
For more information on the HTRD400 System, refer to the following documents:
The content of these documents as they apply to the HTRD400 system is contained within
this Guide. They are also available separately from Honeywell.
Document title Part number
HTRD400 System Quick Setup 900.0327
HTCD50 Digital Camera User Guide 900.0329
HTCD52 Digital Camera Install Guide 900.0332
HTRD System Networking Application
Note 900.0330
HTGPS Module Installation Application
Note 900.0324