Honeywell HRXDS16, User Manual

Page: 87 / 172

Document 800-04559 Rev D 87
11/09
Configuration
Figure 3-59 Motion Detection Settings Screen
2. Your DVR has built-in video motion detection. Video motion detection can be
turned On or Off for each camera.
3. Highlight the box under the Sensitivity column, then press
#
to adjust the DVR's
sensitivity to motion for Daytime and Nighttime independently. There are five
settings, from 1 (least sensitive) to 5 (most sensitive).
Figure 3-60 Motion Detection Sensitivity Screen
4. You can adjust the minimum number of detection blocks that must be activated to
trigger a motion alarm. Highlight the box under the Min. Blocks column, then
press
#
to adjust the minimum number of detection blocks for Daytime and
Nighttime independently. Smaller numbers provide greater sensitivity because
fewer detection blocks must be activated.
Figure 3-61 Motion Detection Min. Blocks Screen
5. Turning Zone View On will allow you to observe how the DVR is reacting to
motion. When in the motion viewing mode, the detection zone of video displays.
Any detected motion within the zone will be displayed in red.
6. You can define the area of the image where you want to detect motion (for
example, a doorway). Highlight the box under the Zone column, then press
#
. The
Motion Detection Zone screen displays.