Honeywell HRXDS16, User Manual

Page: 82 / 172

82
HRXDS Series DVR User Guide
Figure 3-52 Pre-Event Setup Screen
When the DVR is in the Event Record mode it is possible to have it record images
before the event occurs. The Pre-Event screen allows you to define how to handle
pre-event recording.
2. You can turn individual cameras On or Off for pre-event recording. The image
speed can be set from 1.00 to 30.00 ips (25.00 ips PAL), and image quality can be
selectable from Very High, High, Standard and Low.
3. You can set the amount of time to record prior to the event by adjusting the Dwell.
You can set the Dwell from 5 seconds to 30 minutes. The longer the dwell set, the
fewer maximum ips can be set.
Note When the DVR is in the Time or Time & Event mode, it ignores
the pre-event settings and follows the time settings.
4. To save your changes, highlight Save, then press
#
.
Select Cancel to exit the screen without saving the changes.
Archive Screen
1. In the Record menu (see Figure 3-48 ), highlight Archive, then press
#
. The
Archive setup screen appears.