Honeywell HRXDS16, User Manual

Page: 78 / 172

78
HRXDS Series DVR User Guide
Record Screen
1. In the Record menu, highlight Record, then press
#
. The Record setup screen
appears.
Figure 3-49 Record Setup Screen
2. Highlight Recycle, then press
#
to toggle between On and Off. In the Recycle
mode, the DVR records over the oldest video data after all available storage space
has been used. When Recycle is turned off, the DVR stops recording after all
available storage space has been used.
3. Highlight the Event Record Dwell box and set the length of time you would like to
record for the associated event, from 5 seconds to 15 minutes. See
Event Status
Screen , on page 101 for information regarding event recording.
4. Highlight the slide bar beside Auto Deletion, and use the Left and Right arrow
buttons to adjust the length of time recorded data will be kept, from 1 to 99 days.
The DVR automatically deletes video recorded earlier than the user-defined period
under three conditions: at midnight, whenever the system reboots or whenever
the user changes the Auto Deletion settings.
Select Never to disable the Auto Deletion function.
5. Highlight the slide bar beside Limit Time-Lapse Recording, and use the Left and
Right arrow buttons to adjust the length of the maximum storage time for
time-lapse recording, from 1 to 99 days. The Limit Time-Lapse Recording feature
will function when the storage device has enough space to record video data
longer than the preset period.
When this feature is On, the DVR records over the oldest time-lapse video after all
available storage has been used in the Recycle mode, so more event video can
be saved.
Select Never to disable the Limit Time-Lapse Recording function.