Honeywell HRXDS16, User Manual

Page: 70 / 172

70
HRXDS Series DVR User Guide
Figure 3-38 Port Setup Window
6. Configure the port setting based on the PTZ camera manufacturer's instructions.
7. To save your Camera changes, highlight Save, then press
#
.
Select Cancel to exit the screen without saving the changes.
Audio Setup Screen
1. In the Device menu (see Figure 3-34 ), highlight Audio, then press
#
. The Audio
setup screen appears.
Figure 3-39 Audio Setup Screen
2. The DVR can record up to four audio inputs. Highlight the box beside the input,
then press
#
. A list of cameras appears, and you can select which camera you
want associated with that audio input.
3. Highlight Enable Audio-Out, then press
#
. This toggles between enabling and
disabling audio out.
4. To save your Audio changes, highlight Save, then press
#
.
Select Cancel to exit the screen without saving the changes.
Alarm-Out Screen
1. In the Device menu (see Figure 3-34 ), highlight Alarm-Out, then press
#
. Use the
Alarm-Out screen to change the settings and establish a schedule for each alarm
output from the DVR.