Honeywell HRXDS16 User Manual Download Page 46

Page: 46 / 172

HRXDS Series DVR User Guide

If the upgrade package file is not installed on the DVR properly, you will get an
error message.

The system restarts automatically after completing the upgrade.

Figure 3-7

Upgrade Screen

Note

The Upgrade button will be deactivated if the internal hard disk
drive has not been formatted as it requires the space for
temporary files when upgrading the system.

Caution

The USB device must be FAT16 or FAT32 format.

Importing and Exporting DVR Settings

You can import saved DVR settings or export the current DVR settings. To import saved
DVR settings:

Connect the USB device containing the setup file (.dat) to the DVR.

Highlight Setup - Import…, then press

Select the desired setup file, then press Import to import the selected settings and
change the DVR settings accordingly.

Highlight Include Network Setup, then press

to toggle between On and Off.

When set to Off, the network settings will not be changed.

Figure 3-8

Setup Import Screen

Figure 3-9

Setup Export Screen

Summary of Contents for HRXDS16













































































































































































Search results

Summary of Contents for HRXDS16

Reviews:

Related manuals for HRXDS16

Brands by name

Popular brands

Honeywell HRXDS16, User Manual

Search results

Summary of Contents for HRXDS16

Reviews:

Related manuals for HRXDS16

Brands by name

Popular brands