Honeywell HRXD16 User Manual Download Page 106

Page: 106 / 156

Operation

106

Note

While playing back video, the recording speed might decrease.

Note

Only the administrator and users with

Covert Camera View

authority can view video from covert cameras. The covert
cameras in the playback mode are determined by the current
camera settings.

Pressing

PLAY/PAUSE

again will freeze the video on the screen.

RW (Rewind) Button

Pressing

plays video backward at high speed. Pressing the button again toggles

the playback speed between

and

. The screen displays

and

respectively.

Entering Fast Backward Playback mode from Live Monitoring mode can be password
protected.

FF (Fast Forward) Button

Pressing

plays video forward at high speed. Pressing the button again toggles the

playback speed between

and

. The screen displays

and

respectively.

Entering Fast Playback mode from Live Monitoring mode can be password protected.

BACKWARD Button

Pressing

BACKWARD

goes to the previous image.

FORWARD Button

Pressing

FORWARD

goes to the next image.

Summary of Contents for HRXD16





























































































































































Search results

Summary of Contents for HRXD16

Reviews:

Related manuals for HRXD16

Brands by name

Popular brands

Honeywell HRXD16, User Manual

Search results

Summary of Contents for HRXD16

Reviews:

Related manuals for HRXD16

Brands by name

Popular brands