HRTL-One Digital Video Recorder User Guide
Rev 1.00
29
Document 900.0259
10/04
P
Remote Protocol Setup
You can control the HRTL-One remotely using commands specified in
. On the
Remote screen you configure:
•
Remote protocol interface
•
Transmission baudrate
•
Remote protocol ID
1.
On the
Main
Menu screen, press
S
or
T
to select
Remote
, then press
Enter
.
The following screen appears:
Figure 3-9
Remote Screen
2.
Press
S
or
T
to select the
Remote Mode
field, then press
Enter
.
Press
S
or
T
to choose from the following options:
RS-232
= RS-232 interface
RS-485
= RS-485 interface
Press
Menu
to confirm your changes.
3.
Press
S
or
T
to select the
Baud Rate
field, then press
Enter
.
Press
S
or
T
to choose from the following options:
115200, 57600, 19200, 9600, 4800, 3600, 2400, 1200
Press
Menu
to confirm your changes.
4.
Press
S
or
T
to select the
ID
field, then press
Enter
.
Press
S
or
T
to set the numerical number and press
W
or
X
to move to the next
digit (3 digits).
Press
Menu
to confirm your changes.
5.
Press
Menu
to exit this screen and confirm the current operations.
6.
If you have completed all your system configuration changes, press
Menu
again to
exit and close menu setup.
(Remote)
Remote Mode: RS-232
Baud Rate: 9600
ID: 000
(Menu)
Timer
Record
Alarm
Remote
System
Event
J
J
