Honeywell HRSD40F, User Manual

Page: 71 / 168

Document 800-03097 Rev C 71
03/09
Configuration
Adding or Editing an Alarm-Out Schedule
Highlight the + and press to add a new Alarm-Out schedule.
Note The higher the number in the No. column, the higher the priority.
Highlight a field to edit it.
Save your changes by highlighting Save and pressing . Select Cancel to exit the
screen without saving the changes.
Configuring the HSRD40 Displays
The DVR can be set up to display Date, Time, Title, and Status on the monitor. You can
select what icons appear. Each feature can be turned
On or Off . You can also adjust
the margins.
Setting Up the OSD (On-Screen Display)
Highlight Display in the Devices menu, and press to set up the on-screen display
on the main monitor.
Table 3-7 Setting Alarm-Out Schedules
Field Function
Day Allows you to select the days that the alarm schedule will be
active. The choices are: Sun, Mon, Tue, Wed, Thu, Fri, Sat,
M~F, Hol and All.
Range Allows you to set the time that the alarm schedule will be active
in 15-minute increments from 00:00 to 24:00.
Mode Allows you to set how the alarm reacts during the scheduled
time. When set to
On , the Alarm-Out is active during the
scheduled time. When set to Event , the Alarm-Out is only active
when there is an Event during the scheduled time.
Alarm-Out Allows you to select between Alarm Output and Beep (the
internal buzzer).
Allows you to delete an alarm output schedule. You will be
asked to confirm whether or not you really wish to delete the
schedule.