Honeywell HRSD40F, User Manual

Page: 61 / 168

Document 800-03097 Rev C 61
03/09
Configuration
Note Entering the ID and Password and highlighting OK reads the
current IP Address of the DVR configured by the ADSL network.
Note If the DVR is configured for DHCP or an ADSL network, the DVR
IP address might change whenever the unit is turned on.
Registering the Network for DVRNS Service
You can register the DVR using the DVRNS (DVR Name Service) server.
In the Network Setup screen, select the DVRNS tab. The DVRNS Setup screen appears.
Figure 3-27 DVRNS Setup Screen
1. Highlight the box beside Use DVR Name Service and press to toggle
between On and Off . When On , the entire setup screen becomes active.
Note The DVRNS (DVR Name Service) allows the DVR to use Dynamic
IP addresses for remote connection. When this feature is
On ,
you can use the DVR name instead of its IP address to remotely
access your DVR. For the DVRNS feature, the DVR should be
registered on the DVRNS server.
2. Highlight the field beside DVRNS Server and press . Use the virtual keyboard
to enter the IP address or domain name of the DVRNS server.