Honeywell HRSD40F, User Manual

Page: 123 / 168

Document 800-03097 Rev C 123
03/09
Operation
Figure 4-17 Event Log Search Option Window
Table 4-4 Event Log Search Options
Option Function
From Either enable First (highlight the box and press ), which means that the DVR
begins the search at the first recorded image.
OR
Disable
First and then enter a specific time and date from which the DVR begins
the search.
To Either enable Last , which means that the DVR ends the search at the last
recorded image.
OR
Disable
Last and then enter a specific time and date at which the DVR ends the
search.
Time Overlap Enable or disable Time Overlap by highlighting the box and pressing .
This option is only available if you have defined From and To times.
If the DVR's date and time have been reset, it is possible for the DVR to have more
than one overlapping start and stop time. When set to
On , you will be asked to
select one of the overlapping start and stop times. When set to Off , the DVR will
display search results from all start times to all stop times.
Alarm-In Highlight the box beside Alarm-In and press . You can select which alarm
inputs are included in your search.
Motion Highlight the box beside Motion and press . You can select the cameras for
which you want any reports of motion detection.
Video Loss Highlight the box beside Video Loss and press . You can select the cameras
for which you want any reports of lost video.