Configuration
Rev 3.03
43
Document 900.0315
02/07
Figure 3-29
RS232/RS485 Screen
1.
Highlight the field for the settings you wish to make. Select the correct Baud Rate,
Parity, Data Bit, and Stop Bit for the device you are connecting to the DVR.
2.
For RS232, it is possible to select either
Remote Control
,
External Modem
, or
Text-In
in the
Usage
field.
For RS485, it is possible to select either
Remote Control
or
PTZ Control
in the
Usage
field.
Note
Selecting
External Modem
in the RS232 field only defines the
RS232C port as being used for external modem connections.
See
for details on setting up an external
modem.
Note
Selecting
PTZ Control
in the RS485 field only defines the RS485
port as being used for PTZ camera connections. Select the PTZ
device in the Camera Setup screen (see
Note
If networking is configured by the external modem, Text-In
cannot be set for the RS232 field. In the Network Setup screen,
set up the DVR for LAN communications first (see
Summary of Contents for HRHD 410
