Configuration
Rev 3.03
36
Document 900.0315
02/07
Figure 3-20
Alarm In Screen
You can turn each input
On
(via Alarm I/O or Camera Alarm) or
Off
. Each input can be
given a title, and the inputs can be set as
NO
(normally open) or
NC
(normally closed)
independently.
Motion Detector
Your DVR has a built-in video motion detector. Use the Motion Detector screen to turn
video motion detection On or Off for each camera and to define the area of the image
where you want to detect motion.
Highlight
Motion Detector
in the Device menu (
MENU
➤
Device
➤
Motion Detector
)
and then press
. The Motion Detector setup screen displays.
Figure 3-21
Motion Detector Screen
To adjust the DVR sensitivity to motion, highlight the box under the
Sensitivity
heading.
There are five settings from
1
to
5
—1 is the least sensitive and 5 is the most sensitive.
You can define the area of the image where you want to detect motion; for example, a
doorway. Highlight the icon under the
Zone
heading, and then press
. The Motion
Detection Zone screen displays.
Summary of Contents for HRHD 410
