Honeywell HRGX161 User Manual Download

Page: 139 / 150

Managing the DVR | 139

800-16694 - A - 04/2014

Exporting and Importing Configuration Files

Configuration files can be used to configure multiple HRGX DVRs with the same parameters. You
can export configuration files to, or import configuration files from, an external storage device.

To export a configuration file:

1. Insert a USB flash drive or other external storage device into the USB port on the front of

the DVR.

2. Go to

Menu > Maintenance > Configuration

3. Click

Export

to export configuration files to the connected external storage device. The

message "Export succeeded" appears, and the file is added to the file list.

To import a configuration file:

1. Insert a USB flash drive or other external storage device containing a configuration file into

the USB port on the front of the DVR.

2. Go to

Menu > Maintenance > Configuration

3. Select the configuration file you want to import, and then click

Import

. The message

"System will reboot automatically after importing. Continue?" appears. Click

Yes

Summary of Contents for HRGX161























































































































































Search results

Summary of Contents for HRGX161

Reviews:

Related manuals for HRGX161

Brands by name

Popular brands

Honeywell HRGX161, User Manual

Search results

Summary of Contents for HRGX161

Reviews:

Related manuals for HRGX161

Brands by name

Popular brands