Honeywell HRG161X User Manual Download Page 43

Page: 43 / 136

800-13897 - A - 01/2013

Live View

This chapter describes the Live View on-screen display and how to operate and configure the
Live View display.

On-screen Display in Live View

Live View mode starts automatically when the HRG DVR is turned on. You can return to Live View
mode from any submenu by pressing

ESC

multiple times.

Live View Icons

Some icons are provided on screen in Live View mode to indicate different camera status. These
icons include:

Main Output

Aux Output

Event Alarm:

Indicates video loss, video tampering, motion

detection, or relay alarm.

Record:

Indicates the current channel that is recording. The

recording can be started manually or from a schedule, and/or when
a motion detection or alarm event is triggered.

Event Alarm & Record

Summary of Contents for HRG161X









































































































































Search results

Summary of Contents for HRG161X

Reviews:

Related manuals for HRG161X

Brands by name

Popular brands

Honeywell HRG161X, User Manual

Search results

Summary of Contents for HRG161X

Reviews:

Related manuals for HRG161X

Brands by name

Popular brands