manualshive.com logo in svg

Honeywell HRG161X, User Manual

Share
Download
Honeywell HRG161X User Manual Download Page 113

800-13897 - A - 01/2013

HRG DVR Management  |  113

Figure 12-8 Camera Permission Settings Menu

The channel settings include:
•

Remote Live View

: Select and view live video over the network.

•

Local Manual Record

: Locally start and stop manual recording on any of the 

channels.

•

Remote Record Starting

: Remotely start and stop manual recording on any of the 

channels.

•

Local Playback

: Locally play recorded files that are on the HRG DVR.

•

Remote Playback

: Remotely play and download recorded files that are on the HRG 

DVR.

•

Local PTZ Control

: Locally control PTZ cameras.

•

Remote PTZ Control

: Remotely control PTZ cameras.

•

Local Video Export

: Locally back up recorded files from any of the channels.

10. Click 

OK

 to save the settings and exit the menu.

Note

If you forget the password to your HRG DVR, contact your supplier with the serial 
number of the HRG DVR to obtain a secure code to reset your HRG DVR.

Deleting a User

To delete a user from the HRG DVR: 
1. Click 

Menu

 

 

Settings

 

 

User

 to enter the User Settings menu.

2. Select the user you want to delete.
3. Click 

Delete

 to confirm the deletion.

4. Click 

OK

 to exit the menu.

Summary of Contents for HRG161X









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands