manualshive.com logo in svg

Honeywell HRG16, User Manual

Share
Download
Honeywell HRG16 User Manual Download Page 23

800-12005V1 - A - 08/2012

 

1

Introduction

1

This chapter introduces the Honeywell HRG 4-Channel, 8-Channel, and 16-Channel 
Performance Series DVRs and provides an overview of how to operate the HRG DVR using 
various methods.

Overview

Developed using the latest technology, the Honeywell HRG Performance Series DVRs (HRG 
DVRs) combine the latest in advanced H.264 video encoding and decoding technologies to 
deliver high performance, rock-solid reliability, and longer recording times. 

The Honeywell HRG DVRs can be used either as standalone video surveillance products or 
used to build a powerful surveillance network. This flexibility makes them perfect for small 
business applications. 

Product Features

Feature Overview

•

4, 8, or 16 video inputs (model dependent). 

•

H.264 video compression with excellent reliability and superior definition. 

•

4 audio inputs, 1 audio output.

•

IR remote controller and mouse included

•

Independent video encoding parameters, including frame rate, resolution, bit rate, and 
video quality. 

•

Remote access from iPhone and Android devices.

•

Multi-site software. 

•

Recording rates up to 120 (4-channel), 240 (8-channel) and 480 (16-channel) ips @ 4CIF 
resolution. 

•

PTZ  dome  control. 

Summary of Contents for HRG16









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands