Honeywell HREP216, User Manual

Page: 68 / 200

68 | Performance Series HREP2 DVR User Guide
www.honeywell.com/security
4. When the ADD VIEW TYPE dialog appears, click ADD .
5. When the SEQUENCE SETUP dialog appears. From the VIEW TYPE area, select a split
mode that you want to add.
Figure 4-15 Sequence Setup Screen
6. The selected split mode is displayed in the VIEW CONFIGURE area of the screen. Select
a channel you want to display in each channel of the split screen layout.
7. Click CONFIRM .
The set sequence mode is confirmed and will be added to the Add Sequence list in the
order it was added.
8. When finished with the sequence, click CLOSE at the bottom of the screen.
After the sequence type is saved, you will return to the previous screen.
9. Place your mouse cursor over a desired tile of added Sequence, right click on it or press
the
ENTER button on the remote control to edit or delete the sequence.
Editing a Sequence
1. Select a sequence that you want to edit in the list.
2. The EDIT dialog appears (see Figure 4-16 ).
3. Use the

,

,

,

, and ENTER buttons on the remote control or use the mouse to edit
the selected sequence.
• SEQUENCE TITLE : enter a new sequence name.
• ACTIVATION : specify the use of the sequence.
• MODIFY : change the settings of the sequence mode.
• DELETE : delete the selected sequence list.
• CANCEL : cancel the changes.