Honeywell HREP216, User Manual

Page: 57 / 200

800-15802 - A - 12/2013
System Setup | 57
Figure 4-2 Entering Camera Title with Virtual Keyboard
5. When done, press EXIT on the remote control or click CLOSE in the lower screen. The
confirmation message appears and you will return to the previous menu.
Note Camera name allows up to 8 characters in the camera title, combining numbers
and upper/lower case letters.
Image Setup
You can adjust the brightness, contrast, color and quality setting of each channel’s camera (this
option is not available for HD-SDI cameras).
1. From SYSTEM SETUP

CAMERA , select IMAGE SETUP (see Figure 4-3 ).
2. Use the

,

,

,

, and ENTER buttons on the remote control or mouse to edit settings.
3. To apply your changes, click APPLY at the bottom of the screen.
4. Once completed with setup, press EXIT on the remote control or click CLOSE at the
bottom of the screen. A confirmation dialog appears and returns to the previous menu.
Note Press the PREVIEW button preview your adjustments in the image.