Honeywell HREP216 User Manual Download Page 125

Page: 125 / 200

800-15802 - A - 12/2013

Playback | 125

Playback Controls

You can start playing, stop playing or change the play speed of the current video.

Playback Channel Selection Menu

Table 7-1

Playback Controls Descriptions

Item

Description

Jump

Move forward or backward.

Reverse Fast Play

The video will be reversely played at the speed of x64 > 32 > 16 > 8 >
4 > 2 in this order.

Reverse Play

Play the video in the reverse direction.

Pause

Stop playing forward, or any playback temporarily.

Play

Play the video forward.

Fast Forward

The video will be played forward at the speed of x2 < 4 < 8 < 16 < 32
< 64 in this order.

Zoom In

Move to the zoom in/out screen of the selected channel.

Snapshot

Capture the current live video and save it in the .jpeg format. Then, you
can save the captured images in the HDD or export it to an external USB
memory device.

While you perform the snapshot, the current video will stop playing.

Start/End
Bookmark

Add a bookmark for the current playback screen.

Press this to display the

SET BOOKMARK

window. Provide each entry

and click

Start

. The arrow in the bookmark button blinks to indicate that

the bookmarking is in process. If you press the Bookmark button again,
the bookmarking stops and the current settings will be reserved.

Then, the reserved data can be backed up in

ARCHIVE

menu or can be

played in the

RESERVED DATA MANAGEMENT

menu.

Table 7-2

Playback Context Menu Description

Item

Description

CAM1

Display the title of the selected channel.

Zoom

Zoom the video of the selected channel (the zooming function is active
only in the single channel split screen).

Start Bookmarking

The

Set bookmark

popup appears, and you can bookmark a play

point for the backup purpose.

Snapshot Capture

Capture the current live video and save it in the .jpeg format.

Summary of Contents for HREP216









































































































































































































Search results

Summary of Contents for HREP216

Reviews:

Related manuals for HREP216

Brands by name

Popular brands

Honeywell HREP216, User Manual

Search results

Summary of Contents for HREP216

Reviews:

Related manuals for HREP216

Brands by name

Popular brands