Honeywell HREP216, User Manual

Page: 109 / 200

800-15802 - A - 12/2013
Recording Setup | 109
• RESOLUTION : Set the size of the video recording.
• FPS : Set the frame rate per second.
• QUALITY : Set the recording quality.
• AUDIO : Specify the use of the audio recording.
Figure 5-4 Size/FPS/Quality Table
4. When finished, click OK .
You can check the recording size in the size table under the time selection bar.
CAUTION
The video resolution and the FPS options available to
select may differ depending on the specification of the connected
camera.
Schedule Setting
1. Select a start day of the week on the schedule.
2. Click a time cell from which you want to make the schedule and drag it to a desired cell.
Or use the

,

,

, and

buttons on the remote control to move to the cell and press
ENTER . Then, use the

,

,

, and

buttons to move to a desired cell and press
ENTER again.
3. When the time selection is complete, you will be prompted to specify the use of recording
in the Record Setup window (see
Figure 5-5 ).
4. To apply the change, click APPLY at the bottom of the screen.
5. When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.