Honeywell HREP216, User Manual

Page: 104 / 200

104 | Performance Series HREP2 DVR User Guide
www.honeywell.com/security
Figure 4-58 Tamper Event Settings
• IGNORING INTERVAL : Sets the minimum interval of one event detection.
For example, if it is set to 5 seconds and a tampering attempt is detected within 5
seconds from the previous event, the detection is ignored and regarded as the same
event. Set this interval to a longer one if tampering detection reports too frequent.
• LINKED CAMERA : Select the camera to output the event action upon a tampering
detection.
• ALARM OUT : Set the alarm out channel for detected tampering event.
• : Sets whether to sound beeper upon a tampering detection.
• : Sets whether to display a video popup upon a tampering detection.
• : Sets whether to send an email notification upon a tampering detection.
3. To apply the change, click APPLY at the bottom of the screen.
4. When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.