Honeywell HREP16 User Manual Download

Page: 61 / 104

HREP Color Digital Video Recorder User Guide

Document 800-06847 Rev B

08/10

Figure 2-54

BUZZER OUT Setup Menu

These settings determine the behavior and actions that will trigger the internal buzzer.
2. Configure the following behavior settings:

3. Configure the action settings:

Note

Remember to select

APPLY

and click

to save all settings before exiting

these menus.

Configuring E-Mail Notification

1. Click

E-MAIL NOTIFICATION

on the left side of the EVENT/SENSOR window.

The E-MAIL NOTIFICATION setup menu appears.

OPERATION

Enable/disable the internal buzzer.

HDD EVENT

Determines whether a hard drive event triggers the buzzer.

MODE

Select from

TRANSPARENT

(the buzzer sounds only when the

trigger criteria are present) or

LATCHED

(the buzzer sounds for

a set period of time after a trigger).

DURATION

LATCHED

mode, this is the time that the alarm output

remains active after it has been triggered.

ALARM

Configure whether the alarm inputs trigger the buzzer.

VIDEO LOSS

Configure whether video loss on any of the selected channels
triggers the buzzer.

MOTION

Configure whether motion detection on any of the selected
channel triggers the buzzer.

Summary of Contents for HREP16









































































































Search results

Summary of Contents for HREP16

Reviews:

Related manuals for HREP16

Brands by name

Popular brands

Honeywell HREP16, User Manual

Search results

Summary of Contents for HREP16

Reviews:

Related manuals for HREP16

Brands by name

Popular brands