Honeywell HRDVS, Reference Manual

Page: 44 / 140

Rev 2.00 28 Document 900.0281
02/07
Programming Overview
P
Some Program screens have boxes where you can change the text (for example, the title
of a new report, the unit title, or the camera title). To change the text in these boxes:
1. Highlight the box by pressing Enter .
2. On the front panel, use the and buttons to choose the desired character. Use the
and buttons to change to the previous or next character.
Press the Camera 1 button to insert a character. Press the Camera 2 button to delete
a character.
Alternatively, Press the Camera 3 button to open the Text Entry screen.
Figure 4-4 Text Entry Screen
Table 4-1 Front Panel Navigation Controls
Control button Function
▲
(MENU) Activate the first level menus.
• Move up to the next menu item
• Increment to a larger value
• Scroll through letters in a text box
(SEARCH) • Move right through the menu structure
• Move to different letters in a text box
▼
(FUNCTION) • Move down through the menu structure
• Decrement to a smaller value
• Scroll through letters in a text box
(RECORD) • Move left through the menu structure
• If cursor is currently at a sub-menu title, enters the
sub-menu.
Enter/
Select
• Select a function for menu change
• Confirm a change
• Leave current screen and move back one level in the
menus
• Exit Program mode
Camera 1 Insert a character when entering a text string. The text string
must be highlighted.
Camera 2 Delete a letter when entering a text string. The text string
must be highlighted
Camera 3 Open a Text Entry screen when entering a text string. The
text string must be highlighted
MENU
RECORD
FUNCTION
SEARCH
1
2
3