Honeywell HRDVS, Reference Manual

Page: 102 / 140

Rev 2.00 86 Document 900.0281
02/07
Video Playback and Searching
P
Figure 15-2 Search Screen
You may select all of the clips:
• Between a beginning date and time and an ending date and time
• After a beginning date and time
• Before an ending date and time
If you have not enabled the Begin and/or End fields, the date and time is ignored when the
list of clips to be played is created.
You may select the types of events you want to have included in your play list by enabling
the desired events. You may also check the
archive drive only by enabling that box.
When you have selected the desired type of clips to play back, select the Play button and
press Enter . You will see the message
Do you wish to see dismissed events as
well?
Select Yes or No. A list displays that shows all of the video clips that match your
selection criteria.
Figure 15-3 Review Events Screen
You may dismiss events without deleting them when you are playing them.
To play back a video clip, scroll to an item on the list, then press Enter . The video displays
on your monitor. An on-screen taskbar displays while you are playing recorded video (see
Figure 15-4 ). This is the same as the play control panel that displays when you are running
a report (see Running a Report , page 98 ) or reviewing events. Note that the check mark
button used to dismiss an event only shows if your list does not include timelapse video
clips.