Honeywell HRDPX User Manual Download Page 98

Page: 98 / 104

Appendix

______________________________________________________________________________________________
98

Numeric Buttons and Rec

Numeric

In live and search modes, press to watch that channel
full screen.

Record

In live mode, press to start instant recording of all
channels.

Directional and Playback Control Buttons

Live

Go to PTZ mode.

PTZ

Adjust zoom, focus, and iris on a PTZ
channel.

Search

Start reverse playback of recordings.
Press successively to change the fast

reverse speed.

Search-Pause

When pressed successively, the reverse
playback rate increases from 1/2X speed
to 1/8X.

Live

Start playback of the latest recordings.
(By default, the system searches
recordings in the past 30 secs. If no

recording is archived, the system will play
back the latest one.)

PTZ

Adjust zoom, focus, and iris on a PTZ
channel.

Search

Start playback of recordings. Press
successively to change the fast forward

speed.

Search-Pause

When pressed successively, the playback
rate increases from 1/2X speed to 1/8X.

Navigation

Move up.

PTZ

Move the camera view point up.

Search

Start Panorama Search.

Navigation

Move to the right.

PTZ

Move the camera view point to the right.

Search

Play recorded videos. When pressed
successively, the search jumps forward in
time by 30 minute increments.

Search-Pause

Step forward one frame.

PTZ

REPLAY

PANORAMA

Summary of Contents for HRDPX









































































































Search results

Summary of Contents for HRDPX

Reviews:

Related manuals for HRDPX

Brands by name

Popular brands

Honeywell HRDPX, User Manual

Search results

Summary of Contents for HRDPX

Reviews:

Related manuals for HRDPX

Brands by name

Popular brands