Setting General Features
4/16/14
P4820EN.04 © 2014 Honeywell HomMed. All rights reserved.
3 - 17
2. Select the check box next to Use Metric. A check mark appears in that box to indicate that it has been
selected:
3. Select
back
. The
General Setting
screen appears.
Enabling
Device
Capabilities
Genesis provides the following device capabilities:
•
Spoken Vitals
•
Scale Type
IMPORTANT:
Whenever you see a black configuration screen, you have the ability to inadvertently
negatively affect the Genesis Touch application by touching keys on the bottom of the
screen. The only button that should be used from that area is the return key (
),
which allows you to return to the previous screen.
Setting
the
Scale
Type
The Genesis Touch allows you to use either the HomMed/NCI Technologies or A&D scale. After you have
determined which scale will be used for a patient, you must select that scale type to enable it.
This section assumes that you are at the
General Settings
screen. Refer to Getting to the
General Settings
Screen
for more information. The password you will need is:
4237.
To enable the monitor to use the appropriate scale:
1. From the
General Setting
screen, select
Device
. A screen similar to the following appears:
Summary of Contents for HomMed Genesis Touch
Page 1: ......
