Honeywell
43
•
Address: default address is 1.
•
Baud rate: select corresponding baud rate. Default value is 9600.
•
Data Bits: select corresponding data bits. Default value is 8.
•
Stop Bits: select corresponding stop bits. Default value is 1.
•
Parity: there are five options: none/odd/even/mark/space. Default
setup is none.
After completing all the settings, click
Save
.
In one window display mode, right click mouse (click “Fn” Button in the
front panel). The interface is shown as in
.
Figure 5-22 Right Click Menu
Click
Pan/Tilt/Zoom
, the interface is shown as below.
Figure 5-23 PAN/TILT/ZOOM Adjust
Here you can set the following items:
•
Step: value ranges from 1 to 9.
•
Zoom
•
Focus
•
Iris
