Honeywell
39
Alarm In: here is for you to set channel number.
•
Event
Type:
Local Alarm
and
Net Alarm
.
•
Alarm In: Select the alarm-in channel (4 channels).
•
Enable: Enable or disable alarm function.
•
Type:
Normal Open
and
Normal Close
.
•
Period: Set the active period.
•
Alarm Out: select proper alarm activation output channel (multiple
choices).
•
Delay: Here is for you to set proper delay duration. Value ranges
from 10 to 300 seconds. System automatically delays specified
seconds in turning off alarm and activated output after external alarm
cancelled.
•
Show Message: System pops up message in the screen to alert you
once alarm occurred.
•
Record Channel: you can select proper channel to record alarm
video (Multiple choices). At the same time you need to set alarm
record in schedule interface (Main Menu->Setting->Schedule) and
select schedule record in manual record interface (Main Menu-
>Advance->Manual Record).
•
PTZ Linkage: Here is for you to activate PTZ control.
•
Tour: Here is for you to activate tour between different cameras.
Please highlight icon
to select the corresponding function. When
completing all the setups, click
Save
and it goes back to the previous
menu.
Backup
In the main menu, select Backup and the following interface is displayed.
