Honeywell HLVR4 User Manual Download

Page: 37 / 112

Honeywell

Status icon displays in each video window.

Recording

Video loss

Motion detection

Camera lock

Note

Please refer to the following sheet for channel status. The

icon

stands for opening switch function,

stands for

closing switch function.

Manual Recording

Note

You need to have proper rights to implement the following
operations. Please make sure the HDDs have been properly
installed.

To go to the

Manual Record

menu,

•

Right click mouse or in the main menu,

Advanced

Manual

Record

•

In live viewing mode, click record button in the front panel.

Figure 5-5 Manual Record

Record Mode:

•

Manual – the highest priority. After manual setup, all selected
channels will begin ordinary recording.

•

Automatic – channel records as you have set in recording setup
(Main Menu->Setting->Schedule).

•

Closed – all channels stop recording.

Summary of Contents for HLVR4

















































































































Search results

Summary of Contents for HLVR4

Reviews:

Related manuals for HLVR4

Brands by name

Popular brands

Honeywell HLVR4, User Manual

Search results

Summary of Contents for HLVR4

Reviews:

Related manuals for HLVR4

Brands by name

Popular brands